A Practical Guide to Building Thermal Modelling
The development of thermal models is now an integral part of the design process, in particular to demonstrate compliance with the Building Regulations. In addition, project teams are increasingly being asked to commit to future energy use.
Modelling can provide accurate energy consumption data for a set of defined input criteria, but it generally requires that assumptions are made, and this may generate risks for a project. It is important therefore that thermal models are subject to rigorous quality control to mitigate this risk, reduce design errors and provide an audit trail in the event of future disputes or claims.
A Practical Guide to Building Thermal Modelling (BG48/2013) was published by BSRIA in 2013. It was written by Richard Tudor of WSP, with input from industry representatives. It provides an overview of the thermal modelling process with a high-level strategic approach to quality requirements.
It provides practical guidance about the delivery of thermal models based on feedback from practising engineers, focussing on dynamic and compliance modelling rather than computational fluid dynamics (CFD) simulation.
It covers planning, model construction, model output reporting, filing and archiving. It is primarily aimed at thermal modellers, but also provides guidance for organisations undertaking thermal modelling to improve working practices and help mitigate risks.
The guide is available in print, pdf and eBook format from the BSRIA bookshop.
--BSRIA
[edit] Related articles on Designing Buildings
- BSRIA.
- BSRIA articles on Designing Buildings Wiki.
- Building regulations.
- CFD.
- Computational fluid dynamics.
- Computational fluid dynamics in building design: An introduction FB 69.
- Conventions for calculating linear thermal transmittance and temperature factors.
- Dynamic thermal modelling of closed loop geothermal heat pump systems.
- Heating degree days.
- Heat transfer.
- Indoor air velocity.
- Integrating CFD into the design process.
- Passive building design.
- The thermal behaviour of spaces enclosed by fabric membranes (Thesis).
- Thermal behaviour of architectural fabric structures.
- Thermal comfort.
- Thermal comfort and wellbeing.
- Thermal dynamic analysis.
- U-values.
Featured articles and news
A must-attend event for the architecture industry.
Caroline Gumble to step down as CIOB CEO in 2025
After transformative tenure take on a leadership role within the engineering sector.
RIDDOR and the provisional statistics for 2023 / 2024
Work related deaths; over 50 percent from constructuon and 50 percent recorded as fall from height.
Solar PV company fined for health and safety failure
Work at height not properly planned and failure to take suitable steps to prevent a fall.
The term value when assessing the viability of developments
Consultation on the compulsory purchase process, compensation reforms and potential removal of hope value.
Trees are part of the history of how places have developed.
The increasing costs of repair and remediation
Highlighted by regulator of social housing, as acceleration plan continues.
Free topic guide on mould in buildings
The new TG 26/2024 published by BSRIA.
Greater control for LAs over private rental selective licensing
A brief explanation of changes with the NRLA response.
Practice costs for architectural technologists
Salary standards and working out what you’re worth.
The Health and Safety Executive at 50
And over 200 years of Operational Safety and Health.
Thermal imaging surveys a brief intro
Thermal Imaging of Buildings; a pocket guide BG 72/2017.
Internally insulating a historical building
An experimental DIY approach using mineral thermal lime plaster.
Tree species selection for green infrastructure: A guide for specifiers.
The future of the Grenfell Tower site
Principles, promises, recommendations and a decision expected in February 2025.